Cortland Stick

by teddy
(dallas)

Used a Brand new warrior evo pro. Laid down glue all over it, then dyed it all scarlet red. Cooled, rinsed and dried it. Put glue all over it again without taking off the other glue, then dyed it twice in the Black dye so its a good black color. I added 1/2 cup table salt and 2 oz of white vinegar to each batch of RIT dye right before the water boils, then add the dye, mix it up, turn off the heat and drop the stick in until it looks dark enough. It will be darker if you leave it longer. once it was dry i pulled off all the glue.( took a long time..anyone have a secret to get it off?) I think it turned out good, and custom strung dura mesh from warrior.

murderer

by zack
(2854 castertan)

all black diamond mesh

Bill

by Bill
(montana)

Purple with girrafe spots that are yellow. Then the head is tie dyed purple and yellow.

My Stick

by Jake Brightman
(warwick RI)

First off, it is a Brine answer head with regular hard mesh and a nice little Nike shoelace, i dyed the head orange cause its just a cool color.

For the shaft which is not shown, I have a swizzbeat or a warrior platinum alloy that I wrapped in carbon fiber, i don't know if the fiber wrap is legal cause i never used it in a game yet (just wrapped recently). over all its pretty sweet.

B-town lax

by RJ
(brighton, MI)

the answer with soft mesh and white shooting strings and the red fade to silver krypto pro wire fade

purple defense shaft

defense shaft that is purple

Sherwood lacrosse sticks

by Brae
(Sherwood Oregon North America)

A blend of red and black spread out all over the shaft and in white, it says "Sherwood Lacrosse Lives On" and on the bottom it has a white end. The head is black with blood red lining and red and white strings. And finally, a white bolt to screw in the head.

lacrossegreen

by nikki
(irvington, ny, us)

a tie-died green and white shaft with a white head and lime green net.

Breeze RMB

by Rachel
(United States)

The stick is a soft green color that connects to a light peach-orange color head with green zig zags on it. The stringing is a light blue.

Tyngsboro Tigers

red and white and black
tyngsboro tigers down the side of stix

DARTH VADER

by Peter Brown
(Glenside, PA, USA)

It has to be a defense stick. Dye the head black. Get a black warrior platinum alloy shaft. Get your mesh red. Shooting strings and sidewall strings black. Get red tape at the bottom of the shaft.

FCDS

by Jacob Tozier
(Advance NC)

I want the head to be a k-18 and dyed confetii style white, silver and blue. The net should be a 8 diamond hardmesh. Silver vanadium shaft.

Tsunami

by Kevin
(Wyncote PA)

it is a royal blue head with light blue and whit specs that look like a aqua marine setting. Then flourescent green mesh with royal blue shooting strings. the shaft is royal blue and flourescent green where each side of the octagon alternates. ony the flourescent green sides there are wave designs in royal blue

Satanic Destruction

by Mark Mazzoni
(Poughquag,New York)

The shaft will be a Warrior alloy 6000 in red, the mesh will be black, the shooting strings will be orange and the sidewall strings will be red, the head will be dyed as black and red polka dots and that will be a X-3 head. The grip will be black and red criss-crossed tape.

Lax Rox!

by Abby
(Wynnewood, Pennsylvanin)

shaft has good grip, light blue head, black laces, plaid shaft, girls stick

the blue monster

by bobby
(chicago illinois usa)

a stick with a blue warrior outlaw 30in shaft and a warrior evo sky attack head and a blue mesh stringing

riversidelax

by Binh
(Durham, nc )

red head with yellow stripes, black net

dare devil

by dillom
(elkton,maryland,united states)

a kannon head died with black blue red.A shaft made out of sci-tit crankshaft 20 degree bent with a key pocket design and on the shaft black and grey skulls

big peesh

by mason
(southlake)

the shaft will be green with black and white swirly lines and on one side of the shaft it will say sc. the head will be an arrowhead with a neon green hard mesh

Jack Skellington

by Monse
(San Marocs, California)

Just this picture spread out through the whole stick. One big jack skellington on the stick.

Megan's Stick

I want a white shaft with a pink and white head dipped. I would like hot pink shotting strings.

Gavin Klinkose

by Gavin Klinkose
(indanapolic IN amaricay)

green shaft

green and silver net

Harrow DarkStar

by Mr.Harrow
(Canada)

The head of this stick is Black and the mesh is dark Red.
The shaft is ALL black But the words "Harrow Dark Star" are highlighted in the same dark Red as the mesh. Right at the bottom of the shaft is a Skull highlighted Red. The Harrow Darkstar weighs 102 grams and is completely composite. This stick is ideal for accuracy and gives a crazy hard shot the reason being is because it catches some of the air and the releases acting like a sling shot.

HULK

by Erik
(Erie)

Hello Eric I love your submissions, but unfortunately this one was slightly off topic which is Lacrosse Sticks.

Please go to our new Stickbrain village and you can post about what ever you want including fast and tenacious star girls players. And feel free to add pictures or video too.

You can access it by clicking this link:

Stickbrain Village

Thank you for your submission!

Jamey

The Stinger

by Noah Bowers
(York)

blue stick gold strings white rocket pocket blue and black head

The Electrocuter 2

by Mark Mazzoni
(Poughquag, New York)

The shaft will have purple with white lightening on it. It will be a Warrior platinum alloy shaft. The background (main)color of the shaft will be black. The head will be dyed with a camouflage green-black-brown combination. The netting will be royal blue. The shooting strings and sidewall strings will be white.

Tommy

slightly pinched black STX head. Gait 6000 alloy shaft.Yellow 6 diamond mesh with purple shooting strings.

BUCS

by David

BLACK AND YELLOW FATTED, PINCHED ALOT

Jonny B

by David
(McNeill)

I want a eagle crest logo and bands, social Distortion and five finger death punch along with a us army logo also and the slogan theirs strong and then there is army strong

The Terminater

Titanium with a yellow and green swirl.The stick is blue at the top and fade into silver.The head is pinched just a little die black on the top with green on the bottom. On the side two slanted lines with red 6 diamond mesh. Mens stick

McNamee

A Black Shaft with McNamee is the middle written in a lime green with white coming around the letters, with a black mesh

Taylors Halloween head

by Taylor Carter
(Penacook, NH, USA)

My head is a razer pro 2.0 and when I made up my mind to dye it. I went the the store to get some rit dye. I got orange and mixed it with some red I had from a previous dye. I left my head in the dye for 45 minutes to an hour and when I took it of it was the perfect shade of orange. I then got black hard mesh and began to string it with yellow sidewall. I originally put Carolina blue shooting strings in the head but it didn't look right and so I changed the shooting strings to Grey and when I was finally done, my brother said it looked like a jack-o-lantern and so it kind of just stuck as the name. I put the head on my green and silver kryptopro shaft and the green and the orange really blended together. That was pretty much it.

Virginia B. Parker

by Virginia B. Parker
(beaufort, sc, usa)

black handle, black shaft, red net

The Fusser

by Nick Louge
(CT)

Ogtogon shape, snake grip, purple, and orange

alex

by alex
(meriettia ga usa)

a dark purple shaft with a black trible design

The Electrocuter

by Mark Mazzoni
(Pouguag, New York)

I want a blue hardmesh, a dyed camouflage k18 head, a purple with white lightning shaft, and I want the shooting strings to be hot pink and the sidewall strings to be white.

sting - bumble bee

by matt
(north pole)

black warrior helix head,yellow mesh,black hockey lacing, yellow sidewall,black and yellow harrow Ibeam shaft

beast

by scottie
(dunlap)

grip with a good head

frow

by Reid Radke
(lutherville,M.D.)

black diamond mesh, purple X-3 head, black diamond shaft with purple script,purple shotting strings,

THE HIYA STICK

BRINE ANSWER HEAD!!! royal blue 7 diamond mesh with a black sidewall and a neon orange shooting string with a brine f-22 shaft

banchi

by entea sutherlund
(toronto ON canada)

orange,yellow,blue mesh. weight aprox 5.0 kg baby blue shaft with three long red thunder bolts.the head is gold and red with a skull and cross bones at the neckwhere the shaft connects to the head.

black beauty

by mario
(boston)

Take off mesh, dye head black, white sidewall, white hockey laces, black mesh. soo cool!!! helix
used with black harrow shaft

Sunshine

by hi
(united states)

I would want a orange shaft, with a orange and white head.

quazy

rocket pocket mesh, gate fuel, and maverik wonderboy

PATRIOTIC

Patriotic

MATERIALS:
1. RIT dye-blue and red
2. hot glue
3.Stickers- star and letters
4.Plain white head-i used a vapor
5. mesh kit

STEPS:
First i put down the stickers on the top half. I put all different sizes of stars and USA. i folded some stars over the tip of the head. i dipped it in blue and let it sit. when i pulled off the stickers there was some dye that got under the stickers.Next I put down a few stars on the throat of the stick and some hot glue for the stripes.I dipped it in scarlet and let it sit till i got the color i wanted. I strung it with 6 diamond and with red white and blue shooting strings